Showing posts with label Blacet. Show all posts
Showing posts with label Blacet. Show all posts

Saturday, February 01, 2014

Blacet frac rack modular synthesizer modules

Note: Auction links are affiliate links for which the site may be compensated.


via this auction

"Included modules:

1x LFO2430 Micro LFO
1x VCA 2410 Dual Linear VCA
1x MX2040 Mixer Processor
1x EG2070 EG-1 VC ADSR
1x MA3010 Multiple / Attenuator
1x Ad Infinitum Utilus Multus Mixus Mixer / Multiple

Please note that the rack pictured IS NOT INCLUDED!"


Wednesday, September 26, 2012

Blacet Research 2010 (Klang Werk) Frac Rack Synthesizer Module

Note: Auction links are affiliate links for which the site may be compensated.


via this auction

See the seller's other items for more.

"Blacet Research 2010 Klang Werk Frac Rack Synthesizer module. Perfect working condition and cosmetically flawless - rack rash at screw holes. Auction includes Blacet power cable and mounting screws.

Klang Werk is a high quality balanced (or “ring”) modulator with a number of built in features making it more versatile than the usual synth module. It’s more like an effect box, although it is right at home in any modular system. Klang Werk includes a voltage controlled sine to complex waveform carrier generator, a signal preamp, a signal envelope follower, and an output mix control.

A balanced modulator takes two signals (“signal” and “carrier”) and multiplies them together, producing their sum and difference frequencies. The original signals are removed from the output. The result is often used to produce bell like clang tones. The world of the equally tempered scale seems to vanish, to be replaced by an alien sonic landscape filled with moments of unearthly beauty and savage cacophony."






Blacet Research 2310 (Filthy Filtre) Frac Rack Synthesizer Module

Note: Auction links are affiliate links for which the site may be compensated.


via this auction

See the seller's other items for more.

"The FF2310 is a 12dB/octave response voltage controlled filter. The design is based on the classic State Variable configuration that provides simultaneous low pass, band pass and high pass outputs. In addition, the Filthy Filtre has notch and all pass (phase shift) outputs. Voltage controlled Q is also provided with a special dual range feedback circuit that gives maximum total crunchy mind warping self oscillation. Beware your ear drums, amps and tweeters at high levels! An additional modulation, routable to either frequency or Q through a bipolar attenuator, is a handy feature.The mode or filter type is also voltage controllable, allowing switching or morphing between low pass, band pass, high pass and all pass filter types. Separate audio outs for most filter types are also found at the module bottom."




Sunday, March 18, 2012

Blacet VCO frac rack analog oscillator

Note: Auction links are affiliate links for which the site may be compensated.


via this auction

"Blacet Model 2100 VCO analog oscillator. It is frac-rack format and is compatible with Blacet, PAIA and other frac-rack power supplies. This is stable, great sounding oscillator with many modulation options. It is a factory build, not a kit, and it is in excellent cosmetic and functional condition, with only the typical minor rack rash around the mounting holes..."

See the seller's other items for more.


Wednesday, April 07, 2010

BLACET Filthy Filter

Note: Auction links are affiliate links for which the site may be compensated.

via this auction


Thursday, August 27, 2009

Blacet Klangwerk

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
" * Advanced, high SNR, maximum carrier suppression, Analog Devices balanced modulator IC.
* Built-in voltage controlled, low distortion, high stability, sine wave carrier generator.
* Built-in voltage controlled, 3-way waveform modulator operates on the sine wave or external carrier input.
* Built-in envelope follower for separate +/- control of the carrier generator and waveform modulator.
* Built-in X10 signal preamp with signal level LED.
* Built-in output mixer for signal/effect mix.
* Choice of external or internal carrier, with AC/DC coupling switch (for VCA use).
* 3 RU high (5.25", 133.4mm) by 3" (76.2mm) wide; allow 7" (177.8mm) depth. Compatible with Paia FracRak. Voltage required: +/-15vdc regulated @ +60/-30mA. Optional on-board regulators for +/-18vdc unregulated supply. Jacks: 1/8" (3.5mm). Panel is black anodized, with white lettering.

The Balanced Modulator with its bell-like, dissonant modulations is one of the key sound generators of electronic music. In operation, the two input frequencies are multiplied and the sum and difference output with the fundamentals suppressed. The resulting tones can exhibit rare beauty or serious cacophony. <>With a built-in envelope follower and three way voltage controlled waveform modulator, this module goes way beyond conventional ring modulators. Klang Werk packs a whole lot of modular synth into a small package, but doesn't take anything away from its use as a traditional module."




Wednesday, August 19, 2009

Frac modules: Blacet Stonz and Metalbox Bi-N-Tic

Note: Auction links are affiliate links for which the site may be compensated.

listed by inverseroom on the forum


Tuesday, May 19, 2009

Blacet Binary Zone Module

Note: Auction links are affiliate links for which the site may be compensated.

via this auction


Blacet Filthy Filter Module

Note: Auction links are affiliate links for which the site may be compensated.

via this auction


Sunday, March 08, 2009

Blacet Modular Rack w Hex Zone LFO

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
"Descriptions here: http://www.blacet.com
Includes:
Blacet Hex Zone
Blacet Micro LFO
Blank decorative 1U panel
Rack
Power supply
Mounted in shallow Gator case
AC cable"


Wednesday, February 11, 2009

Blacet VCA Quad Mix

Note: Auction links are affiliate links for which the site may be compensated.

via this auction


Sunday, January 11, 2009

Banana Interface modular synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"I made this module to interface my (Blacet and Modcan) banana jack modular gear with the outside world. The panel was ordered from Front Panel Express. There are four banana to 1/8" to 1/4", two banana to 1/8", and one banana to 1/8" multiple. The panel also has a plug to ground the jacks to your power supply. The plug is Modcan style, but it can still be plugged into a Blacet power distribution board."


Friday, January 25, 2008

Blacet Improbability Drive

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
"i modified this so that external signals can be used for the sample and hold instead of noise which is hard-wired. for the jack i just disconnected the QUANTIZED jack wires and used it because i never used that feature and didn't want to drill a new hole. i can put it back the way it was if the winning bidder wishes (but it's better this way IMO! now instead of random voltages you can insert a sine for stair-stepping for example). see the picture of the wires going to the resistors. also, when building this kit (i'm an electronics technician with a degree so please don't worry about build quality) i troubleshot for weeks trying to get it all working until i finally found the issue, a board fault, a millimeter sized gap in a trace, and fixed it. this often occurs when a particle falls during a manufacturing stage, the rest of the board is fine. was a real learning lesson finding it! see the picture with a wire soldered directly onto the circuit board. it's on there rock solid and not going anywhere. module functions perfectly.

more info
my mod"


Sunday, January 13, 2008

Blacet Final Filtre

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"FF2030 Final Filtre
* Fifth Order Switched Capacitor LP and Notch Filter
* Tracking Smoothing and Anti Alias Filters
* 1V/Octave Frequency Voltage Control Input
* Q Voltage Control Input (with self oscillation)
* Built In LFO/A/D with Gate Input, Gate Button and Voltage Output
* (Internally connected to control frequency)Eight Octave Frequency Range
* Very Low Noise Design
* Optimized for Modular Signal Levels (10V p-p)

Using switched capacitor filter ICs results in a very accurate high order filter with a sharp response. Plus, the noise level is the lowest of any voltage controlled filter on the market today. From a very fat response at low Qs to a sharp slicing signal at high Qs to pure self oscillation, the Final Filtre is in a class of it's own."


Monday, December 31, 2007

Blacet Final Filtre

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
"No Longer in Production. Destined be a classic Blacet Frac Rack format Module.

The Final Filtre is a high quality FIVE Pole Low Pass filter designed around a high accuracy, low noise, low distortion switched capacitor filter IC. The Final Filtre includes 1V/oct voltage control of the frequency and voltage controlled Q. A notch filter output is also provided. The Filtre includes a built in event generator, making it more versatile than the usual synth module. It’s more like an effect box, although it is right at home in any modular system. The EG functions either in the LFO or AD (attack/decay) mode, providing modulating waveforms ranging from the low audio range to 30 seconds in length. Filters are one of the main devices responsible for the characteristic sound of electronic music. Users will appreciate the liquid quality and clean tone of the Final Filtre."


Friday, September 21, 2007

Blacet Time Machine

Note: Auction links are affiliate links for which the site may be compensated.

images via this auction.


Wednesday, May 23, 2007

Blacet VCO

Note: Auction links are affiliate links for which the site may be compensated.

via this auction.