images at this auction
Sunday, November 02, 2008
Roland MPG-80
images at this auction"Made to control the Roland MKS-80 Super Jupiter Synthesizer (Ebay item #280275045768)"
Roland G-505+GR-700 Electric Guitar Analog Synth System
images at this auction"Roland G-505 Electric Guitar and GR-700 Guitar Analog Synthesizer System! The GR-700 is a stomp-box guitar synth with the same synth engine as the JX-3P. The G-707 is a Strat-style electric guitar featuring red metallic finish, rosewood fretboard, ender Tele-style bridge, Sperzel locking tuners, 21 frets, maple Neck, solid top, tone/volume aftermarket 3 switch pickup selectors (on/off/invert), 3
single-coil pickups, passive electronics, and 24-pin socket connection to Roland systems via 24 pin cable. "
Analogue Systems Gate Delay Module RS-340
images at this auction"The RS340 is a multi-mode Gate Delay module and Shaper that recognises any positive-going pulse exceeding +1V, and then generates a Trigger and a Gate of specified duration a user-defined time afterwards. Two LEDs offer visual feedback regarding the Gate status of the module. Click here to download the users manual for the rs340 (PDF)."
PAiA Gnome
images at this auction"Paia Gnome analog synthesizer. Basic single osc analog sound module that runs on two 9V batteries. Single VCO / VCF / VCA with AR envelopes and a switch to sustain while the trigger is on. The contact strip on the front is missing so the probe for the control voltage is not usable (just use the knobs instead). Some of the pots and switches are scratchy, but work fine. A little use and/or clean up will take care of them.
Here's a link with some additional information if you are unfamilar with this synth"
Roland GR-300
images at this auction"Features of the GR-300:
* 6-voice polyphony
* 2 oscillators per voice
* VCOs are directly harmonically locked to each string, but can be tuned separately
* VCF with variable length sweep up and down
* Low Frequency Oscillator, for Vibrato Effects
* Built-in foot switch controls the VCO mode (single/dual)
* Built-in foot switches control the VCO harmonize pitch (detuning of the VCO's)
* Built-in foot switch controls the VCF mode (on, bypass, or inverted)
* Pedal control input for the VCF
* The GR-300 can output either the guitar, the synth, or a mix of the two
* Synchronized, flashing LED status indicators
* Heavy-Duty Construction with Quality Components
* All-Analog Construction
Subscribe to:
Posts (Atom)
