Showing posts with label Cwejman. Show all posts
Showing posts with label Cwejman. Show all posts

Wednesday, November 27, 2013

Cwejman D-LFO Multi Function Dual LFO Module

Note: Auction links are affiliate links for which the site may be compensated.


via this auction


Monday, March 26, 2012

Cwejman S1 Mk2 Analog Semi Modular Synth SN S1MK2-023

Note: Auction links are affiliate links for which the site may be compensated.


via this auction

See the seller's other items for more.




Friday, February 04, 2011

Cwejman VCFC Compressor

Note: Auction links are affiliate links for which the site may be compensated.

via this auction



Monday, November 22, 2010

Cwejman ADSR-VC2

Note: Auction links are affiliate links for which the site may be compensated.

via this auction


Wednesday, March 17, 2010

Cwejman vm-1

Note: Auction links are affiliate links for which the site may be compensated.

via this auction


Tuesday, February 09, 2010

Cwejman VCEQ-3

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"It is so much more useful than one might think, the flexibility of a multiband EQ on complex oscillator waveforms before they go to a filter makes for elegant development of timbre and it's value in general tone shaping is endless."

Sold For: US $430.00
via selectivepressure in the comments


Friday, September 04, 2009

Cwejman S1 Mk2 Patchable Semi Modular Analog Synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction


Cwejman VCO-6

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
"the vc0-6 is a single voltage controlled oscillator and it has six individual waveforms (see below). the frequency is controlled by manual controllers (knobs) and fm (leveled inputs). the vco-6 can by sync-ed by an external signals frequency, as well. frequency controllers: the oscillator's frequency is controlled by range (from c2 to c8), tune knob (± 6 semitones in audio mode and ± 12 semitones in lfo mode) and leveled fm inputs (dc or ac coupled fm1 and exponential f2 and fm3). frequency modulation (leveled fm1, fm2 and fm3 ) determinates the intensity of frequency modulation and/or pitch control. the fm2 and fm3 inputs are carefully calibrated for 1volt/octave sensitivity and it tracks the musical scale for more than 8 octaves. waveforms: the vco-6 is equipped with six separate waveform outputs. the different waveforms contain different harmonic structures respective to their overtone content. thus they sound different from each other and can be used as raw material for creating different types of sounds. this is a brief description of waveforms: * sine contains low order harmonics with low amplitude and sounds "dull" or "pure". * triangle contains more high order overtones than sine and sounds still "dull" and "pure" but with more "edge". * saw contains many overtones and sounds "rich" and "cutting". it is especially useful for strings, brass and vocal-like sounds. pulse controlled waveforms: the vco-6 has three different pulse controlled and modulated waveforms: * width modulated saw tooth which act as a true detuned dual saw tooth oscillator when the pwm1 is modulated with a low frequency signal (preferably a triangle shaped waveform) and the detuned frequency (frequency offset between two detuned saw tooth waves) is equal to doubled modulated signals frequency. when the pwm1 is modulated with the signal in audio range the pulse modulated saw tooth act as saw tooth ring modulator. the vco-6 has two different sounding pulses: * pulse1 and pulse2 . the pulse1's pulse width is controlled by a signal coupled to the pwm1 input and thru switch pw by the manual controller pulse width in position 1&2. the pulse2's pulse width is controlled by the manual controller (knob pulse width) and a signal coupled to the pwm2 input. both pulses can be controlled from square waveform to very short pulses (spikes). pulses are symmetrical in the whole range of pulse width and they are different from the "classic" variable pulse which is asymmetrical when the pulse width is not equal to 50% (square waveform). the pulse1 contain more even harmonics (as saw tooth waveform) and the pulse2 contain more even harmonics (as square waveform) which results in different sounding signals. sync means that sync'ed oscillators frequency is tracked to the frequency of controlling oscillator."


Cwejman VCO-2RM

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
"vco-2rm is equipped with seven waveforms, lfo mode, sync and waveform outputs are routed to a dc coupled ring modulator (rm). the oscillator's frequency is controlled by coarse, tune knobs and fm inputs. tune finetunes the oscillators (± 6 semitones). frequency modulation (leveled fm1, fm2 and fm3 ) determinates the intensity of frequency modulation and/or pitch control. all fm inputs are carefully calibrated for 1volt/octave sensitivity. frequency modulation, by an audio signal, creates so called "side-bands" that consist of sum and difference of signals frequencies. these additional frequencies do mostly have a non harmonic sound. modulation, by low periodic waveforms, such as lfo or envelope generator creates momentary pitch shift of modulated oscillator common named vibrato (by lfo) or pitch bend (by envelope generator). sync means that sync'ed oscillators frequency is tracked by the frequency of controlling oscillator; osc2's frequency is syncronized to osc1's frequency. when the tuned frequency of sync-ed oscillator has the same or multiple of frequency of controlling oscillator then sync-ed oscillators waveform has no or very little "glitch" which results in a sync-ed smooth waveform (sinus waveform). the sync-ed waveforms (with additional fm modulation) are perfect for cutting edge lead sound and hard, funky basses. pulse width % adjusts the pulse width of the pulse wave from 5% to 95%. waveform selects the waveform or a mix of waveforms from an oscillator. pulse width control works also on the waveform mixes where the pulse wave is included. ring modulator (rm) is a classic audio effect device and due to the non harmonic character of the output signal, very useful to create metallic timbres such as bells, sweeping whistles and percussive sounds and tremolo effects (modulated by low periodic signal like a lfo). two input signals are pre-patched to osc1 and osc2 outputs. using the inputs x and y, any other external signal can be routed directly into the ring modulator. as modulation source the ring modulator can produce a huge amount of complex waveforms both in the low and audio frequency range"


Saturday, December 20, 2008

Modular Drum Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
"# Analogue Solutions MT16 MIDI to Trig (generates signals)
# Analogue Solutions BD99 Bass Drum
# Analogue Solutions SD99 Snare Drum
# Analogue Solutions HH88 Hi Hat
# Analogue Solutions SH-NZ Sample and Hold
# Doepfer A-124 (VCF5) Wasp Filter
# Cwejman VM-1 Voice Module (two oscillators, two envelopes, one multi-mode filter)"




Thursday, June 19, 2008

Cwejman S1 Semi-modular Analog Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is NOT the MK2 version. Here are some differences between the one I'm selling and the MK2:
# S1 has 5 waveforms for the oscillators/lfo. S1MK2 has 7.
# The S1 LPF only function in lowpass mode. S1MK2 LPF functions in 2 different lowpass modes and bandpass mode.
# There are probably some other minor differences, but I don't know what they are."


Monday, May 12, 2008

Cwejman S1

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Update: I received a scam alert on this one. You can find the original auction here. Note the seller is different and the winning bid of the prior auction is not the seller of the new auction.



Wednesday, April 30, 2008

CWEJMAN SOUND S1 SEMI MODULAR SYNTHESIZER

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
"Semi-Modular Synthesizer
"Semi" modular means that all functions and modules (oscillators, generators, filters, etc.) are linked. The synthesizer is preconfigured, but the configuration can be changed at will. All signals can be used as sounds or modulation sources and all parameters: pitch, pulse width, volume, resonance, etc., can be modulated from any source. Imagine the creative opportunities waiting for you inside this instrument!

Warm and powerful sound
The most unique feature of the product is the sound processing circuits that produce the unmistakable Cwejman Sound: a warm, fat, and genuine analogue sound.

Sound quality is consistent and powerful, especially in the bass register. The Cwejman S1 has a distinct sound and packs enormous possibility in a compact package.

The Cwejman S1 sound circuits are unique, using a proprietary design. The sound is characterized by the same punch, bottom and consistent sound found in vintage analog treasures - but the S1 also has the ability to sound completely different."


Thursday, April 24, 2008

Cwejman MMF-1 Multmode Filter

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
"The MMF-1 is the most flexible single filter. Additionally, the solution with variable SPACING (bandwidth) and two variable resonance peaks make it possible to create various vocal like sounds.

The Multi Mode Filter offers seven types of modes:

* Low pass
* High pass
* Band pass
* Dual band pass-------with dual resonance (Q-PEAK) and controlled bandwidth by SPACING
* Dual band pass-------with single upper resonance (Q-PEAK) and controlled bandwidth by SPACING
* Dual band pass-------with single lower resonance (Q-PEAK) and controlled bandwidth by SPACING
* Notch------------------with single or dual resonance (Q-PEAK) and controlled bandwidth by SPACING

The POLE defines how steep the filter cuts off the attenuated frequencies. It means, that the 2 pole filter cuts signal with 12dB/octave, the 4 pole filter cuts with 24 dB/octave. The higher the slope, the more effective the filter cuts. The CUTOFF frequency or corner frequency defines at which frequency the filter starts to attenuate frequencies of the incomming signal. The cutoff frequency of the filter can be adjusted by CUTOFF knob from 16kHz to 16Hz and tracked by the external signals CUTOFF CV1 and CV2.

The Q-PEAK (also known as "resonance" or "emphasis") boost audio signals in the near range of the cutoff frequency and makes the tone sound more "cutting". From a certain level on, the filter start o self-oscillate and works as a sine wave-oscillator and in dual band pass mode (in dual Q-PEAK mode) produces two-tone sinus wave (the two-tones frequencies are controlled by CUTOFF and SPACING).

The q-peak can be controlled by knob Q-PEAK and/or by signal from levelled input Q-PEAK CV, levelled by Q-PEAK CV knob. The SPACING control defines bandwidth for all three dual band pass modes and/or spread of two resonant peaks. The amount of spacing can be controlled by knob SPACING and/or by signal from input SPACING CV.

The audio knobs AUDIO1 and 2 controls the audio signals level coming from inputs AUDIO1 and AUDIO2. The audio output is provided by output socket labelled AUDIO and is revealed by white surround. "


Wednesday, January 16, 2008

Cwejman VCEQ-3

Note: Auction links are affiliate links for which the site may be compensated.

via this auction


Monday, December 03, 2007

Cwejman S1 MK2

Note: Auction links are affiliate links for which the site may be compensated.

via this auction



Wednesday, November 21, 2007

Cwejman S1 MK2

Note: Auction links are affiliate links for which the site may be compensated.

images via this auction


Sunday, June 17, 2007

Cwejman S1 MK2

Note: Auction links are affiliate links for which the site may be compensated.

Title link takes you to shots pulled via this auction.