MATRIXSYNTH-B: MOOG Rogue Classic Vintage Synthesizer

via this auction
"It's a two-oscillator analog monosynth from Moog with the genuine and highly desirable Moog componentry,

The Rogue is also utilized as the Moog Taurus II Bass Synth with 1-1/2 octave bass pedals instead of the Rogue's 2-1/2 octave keyboard.

The Rogue, a successor to the Moog Prodigy, is a 2-VCO, monophonic synthesizer with a 2-1/2 octave, 32-note (F-C) keyboard.

Both VCOs are tunable to three octaves by a common switch. In addition, VCO2 is tunable via a knob to anywhere between a half-step below to an octave above VCO1. There is also a single switch that selects the waveform for both VCOs. A three position switch syncs VCO2 to VCO1. It can be hard synced or contoured synced, where the amount that VCO2 is synced to VCO1 is controlled by the envelope generator.

The mixer section allows both VCOs and the noise generator to be mixed together, with a slider controlling each level. The mixer can be pushed to overdrive (distort) the waveforms.

The filter section features variable keyboard tracking controlled by a knob, and sliders for the cutoff frequency, emphasis (resonance), and envelope amount.

It also has "the pitch and mod wheels up above the keyboard, not to the left of it, along with a fine tune knob and a glide (portamento) knob."

The Rogue has a single envelope generator for attack and decay, that switches to activate the sustain mode.

There is also a switch that selects how the envelope affects the VCA. It can be set for either contour, keyed, or bypass (which was a simple organ-style gate).

Connections are: -
Unbalanced Audio Output Connection: 1 x 1/4" Mono Phone Plug
Unbalanced Audio Input Connection: 1 x 1/4" Mono Phone Plug

Trig In/Out - Gate Trigger: 1 x 1/4" Stereo Phone Plug
Keyboard In/Out - CV Control Voltage In & Out: 1 x 1/4" Stereo Phone Plug
Electrical Requirements - Input Voltage: 24 Volts AC - using mains adapter (supplied)