Saturday, December 31, 2011
Arturia Origin Desktop Synth
ARP Odyssey MKI blackface
Friday, December 30, 2011
Arp Axxe Analog Synthesizer
Thursday, December 29, 2011
Doepfer A-155 analog sequencer
MOOG PRODIGY
Subscribe to:
Posts (Atom)
Note: auction links in posts are affiliate links and help support the site at no cost to you.
via this auction
"In short, this is a semi-modular synth, in which Arturia have put in different modules, mainly from classic synths, which can be patched together to create your own instruments.
For example, they have all the modules of a MiniMoog, Yamaha CS80, Arp 2600, Prohet Vs and Roland Jupiter 8 (plus Origin own modules, and new ones being added all the time to the updates). These can be patched together in different combinations to form whole new instruments. You can have a Minimoog Osc and a J8 Osc going into a Arp 2600 filter patched into a Cs80 envelope into a .....etc
This is just scratching the surface though. There are quick access templates, such as the Jupiter 8 one in the above photo, and 999 preset slots. Plus a computer software to store all the presets you can't fit on there.
Its also possible to route audio into the synth and process through the filters..etc
It has a step sequencer and a load of FX plus a great multi mode and Joystick."
via this auction
"it is a late MKI blackface (it had no CV control, and no PPC pitch bend). It has the old A1, B1 and C1 boards."
via this auction
"The Arp Axxe is a 1 oscillator mono synth with mixable square, sawtooth and square / sine LFO modulation and LFO and ADSR control of pulse width, quite a powerfull synth with a sharp sound and in glorious analog, ideal for band use or as a compliment to a working studio offering plenty of pure analog magic."
via this auction
"analog and trigger sequencer, 2 rows of 8 steps with knobs and 2 rows of 8 steps switches
features of the analog rows (knobs):
* 8 potentiometers (knobs)
* lower row: scale (knob), upper row: 1v/2v/4v (octave range switch for exact vco control)
* glide time (knob), same as portamento or slew limiter
* glide control (control input for switching glide on/off)
* s&h control (control input for internal s&h)
* pre glide/s&h-out (analog output before s&h and glide unit, especially required when external audio signals are used as inputs of the lower row)
* post glide/s&h-out (analog output after s&h and glide unit)
* lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs, the knobs of the lower row are working in this case as attenuators
features of the trigger rows (switches):
* 4 trigger/gate tracks with 2 rows of switches
* toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position)
* 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal)
* 1 gate row (i.e. a high signal is applied during the length of the step set)
control inputs and buttons:
* step (defines the tempo of the sequence, same as clock or trigger input)
* reset (resets all rows to step 1)
* start (starts the sequence at the momentary position)
* stop (stops the sequence at the momentary position)
this module has a maximum current draw of 100ma. it requires 50 te/hp worth of space to fit in a eurorack frame."
via this auction
"This Moog Prodigy is the advanced version with the vcf input and the keyboard in/out and the s-trig in/out and all the other trendy stuff this advanced version comes supplied with..."
