Doepfer Modular

Title link takes you to shots pulled via this auction.

"A-110 VCO Standard VCO --- Great sounding VCOs, octave knob, unlike many other modular synth VCOs
A-100 VCO Standard VCO
A-114 Ring Modulator --- Dual ring mod module
A-148 Dual Sample and Hold --- dual!!
A-120 VCF1 Low Pass Filter --- 24 dB LP filter after the famous Moog Transistor Ladder design!!
A-128 Fixed Filter Bank --- Great filtered effects!!!
A-116 WP VC Waveform Processor --- great for clipping waves and adding symmetry!!
A-180 Multiples --- all 8 jacks connected
A-143-3 Quad LFO --- the last LFO module you will need to buy!!
A-115 DIV. Audio Divider --- Adds four(4) suboctaves to your original sound source, phattens your sound!!
A-123 VCF4 24dB High Pass Filter --- great filter with a CEM 3320 chip, use with LP to create a notch!!
A-117 Digital Noise and 808 Source --- noise and random clock, 808 outputs sound like hihat and cowbell!
A-180 Multiples --- jacks are linked in two sets of 4.
A-188-2 Tapped BBD Module --- INCREDIBLE delay and effects!!! Outputs for every stage 2 times over!!!!
A-140 ADSR Envelope Generator --- 2 outputs and an inverse output!!
A-131 Exponential VCA --- 2 inputs, exp. better for audio.
A-181 Multiples 2 --- with 1/4" jacks set up in two different configurations
2 x 2 hp blank panel
4 hp blank panel"

Darkstar XP2

via this auction. Note the vocoder chip upgrade was never made.

"Specs:
Polyphony: 8 Voices
Multitibral: 5 Parts

Each part features:
Level, Transpose and Note range setting.
Tremolo effect modulated from one LFO / Pan effect modulated from one LFO or Envelope / 4 x assignable outputs
Each Patch holds 5 different Parts.
64 Patches = 320 different sounds (64 patches X 5 Parts per patch)
Chorus FX sends Per Part (Hard wired to Outs 1 and 2)

Voice Specification: 2 Oscillators
Each continuously variable between Sawtooth and square/pulse output
Oscillators can be hard sync together
RingMod
Each can be de-tuned and can be modulated by one of the envelopes/LFOs
For each the pulse width can be varied and modulated by one of the envelopes/LFOs
Oscillator 2 can be transposed 5, 7, 12, 16, 17, 19 or 24 semitones

Oscillator 2 can be switched between:
Pink noise, White noise, Blue noise,Normal waves, Formant wave form, Sine wave, Input 1, Input 2

Joystick: Assignable X/Y Joystick

Filter: 12dB per octave resonant
The cut-off frequency can be modulated by the and set to track the keyboard
The resonance can be varied and modulated by one of the envelopes or LFOs
The output can be switched between off, low pass, band pass and high pass
Envelop Mod Can Be LFO2 or VCF envelope

Envelopes: 2 x ADSR envelopes, each of which can be set to respond to key velocity

LFOs: 2 x LFOs, each with a separate speed and delay control
Each LFO can be set to output one of the following waveforms:
Each can be set to key sync
Each can be synced to incoming MIDI clock
Ramp, Triangle, Square, Sine, Pulse, Sample & hold, Random

Triggering/Portamanto: Note triggering can be normal or auto glide
Polyphonic portamanto for polyphonic parts
Portamento has constant time, two polyphonic modes and six pre-glide modes

MIDI:
Note ON/OFF, Velocity, Pitch bend, Mod wheel / aftertouch (assignable), Program change, Sustain pedal, most
parameter controls, System exclusive. Midi in,Out,thru

Power Supply: External 9vDC (600mA minimum) output plug wired centre pin +

Dimensions/Weight: 340x230x50mm (13.4x9x2 inches) 3.7kg (8lbs)

4 1/4'' outputs
1 stereo 1/4'' headphones out
1 stereo 1/4'' input
Optional Vocodar Chip"